Cometic 85.5mm .066 inch MLS Head Gasket DSM - OEM DSM Drivetrain - Maintenance - DSM Performance Parts

Home | Help Desk | View Cart

Printable version

Categories

Bestsellers

1. DSM OEM Clutch Release Fork
2. DSM Clutch Fork Pivot fulcrum pivot ball
3. DSM OEM Clutch Throw Out Bearing
4. Mitsubishi OEM Clutch Slave Cylinder - DSM
5. Mitsubishi OEM Master Cylinder - DSM
6. Mitsubishi OEM Diamond ATF SP III Automatic Trans Fluid Quart
7. Mitsubishi OEM Clutch Release Fork Boot - DSM
8. Mitsubishi OEM Slave Cylinder Extension Rod - DSM

Help

>> Contact us
>> Privacy statement
>> Terms & Conditions
Website For Sale

DSM Performance Parts | DSMparts.com :: Maintenance :: OEM DSM Drivetrain :: Cometic 85.5mm .066 inch MLS Head Gasket DSM

Cometic 85.5mm .066 inch MLS Head Gasket DSM

Product Details

Cometic Head Gaskets are developed with the performance enthusiast in
mind. With so many individual requirements for each motor Cometic offers
a number of options to suit your specific motor and needs.

*MLS*

The Cometic MLS gasket is comprised of three layers of Stainless Steel.
Cometic uses Stainless steel for increased strength, it�s ability to
rebound and corrosion resistance. The outer layers of the gasket are
embossed and coated on both sides with a flouroelastomer rubber based
material (Viton) designed to meet the demands of a variety of harsh
sealing environments, load conditions and surface finishes. The Viton
coating is heat resistant to 2500C or 4820F.

The center or shim layer of the gasket is comprised of an uncoated
Stainless Steel layer, which can be varied to accommodate multiple
thickness requirements. The MLS gasket is ideal for both aluminum heads
to cast iron blocks and aluminum heads to aluminum blocks.

The composition of MLS will also withstand the shearing forces created
by aluminum heads on cast iron blocks. No re-torque is necessary. By
design the MLS gasket promotes an even torque load across the sealing
surface allowing for measurable reduced bore distortion.